|
BACK
NEXT
The hood scoop arrived
And the Side Scoops
Which I cut into pieces and mount to the side over the mesh.
I also got the DODGE etch in the mail from CrazyPC
I then stuck it on the window
Next I cut the exhaust hole and then taped off the top to be painted.
I made the hole edges smoother and laid the paint down
Once it dried I peeled off the tape and added the pin stripe
Next up was replacing the mesh on the hood scoop.
After I put it in, I painted the scoop to match the case.
I then drilled out the screw holes, installed the Blue LED exhaust fan and used a black marker to darken
the screws.
Then I finally got the hood scoop mounted.
So I tested the fan and I could easily feel the cool air blowing out.
The last thing I needed to accomplish was finishing the pin stripe that comes from the logo and goes clear
to the end of the case
Now for a little detail. I got some lettering for .99 cents.
And carefully added them to both sides of the scoop
I finally got the chance to add the PSU.
And I went back to the grill. First the primer.
Then the closest green I could find to match
Then added the black Mopar "M".
I painted the grill frame to match the black.
Then put the finished product on the panel
You've got to LOVE the custom stuff!
Then just to know where this mod was headed I added the Cooler Master Musketeer and the DVD burner.
|
